Just-Blog, 就是Blog

http://www.maxtor.com/en/support/downloads/powermax.htm

The Powermax utility is designed to perform diagnostic read/write verifications on Maxtor/Quantum hard drives. These tests will determine hard drive integrity. The Powermax utility is effective on all ATA (IDE) hard drives with a capacity greater than or equal to 500 MB. Maxtor recommends the use of this utility for troubleshooting potential hard drive problems. These problems include, but are not limited to the following:

– Potential hard drive surface problems (e.g., bad clusters, bad sectors, partitioning/formatting problems, etc.).

– Drive recognition problems (e.g. hard drive that is not recognized by the operating system).

– Software removal.

(The utility is distributed as a Win32 utility that writes to a bootable floppy.)

http://www.seagate.com/support/disc/utils.html

DiscWizard Program Suite
Ultra ATA/100 Configuration Utility
SeaTools Disc Diagnostic

SeaTools Desktop
Desktop edition works with most Seagate and Conner ATA or SCSI drives in desktop systems and has a 98% accuracy rate.

Features: Text and graphics are easy to read and follow. The software is available in English, Deutsch, EspaA±ol, and FranA§ais.

Access: Download this file to your hard drive then execute to create a bootable diskette.

(The utility is distributed as a Win32 utility that writes to a bootable floppy. The code is descended from Ontrack Disk Manager.))

http://support.wdc.com/

Western Digital Data Lifeguard Tools
Western Digital Data Lifeguard Utilities
Western Digital Data Lifeguard Diagnostics
Western Digital Ultra ATA Manager

(The several editions mentioned, all descended from Microhouse International’s EZ-Drive, seem to be variously contained within zip archives or Win32 installers, and after unpacking get variously placed on bootable floppies.)

http://www.hitachigst.com/hdd/support/download.htm

Drive Fitness Test (v4.02)

This download creates a self-booting DOS diskette to run the DFT utility. The Drive Fitness Test (DFT) provides a quick, reliable method to test SCSI and IDE hard disk drives, including Serial-ATA IDE drives. The Drive Fitness Test analyze function performs read tests without overwriting customer data. (However, Drive Fitness Test is bundled with some restoration utilities that will overwrite data.)

V4.02 changes include:

* Added support for new drive models
* Continuous improvement
Note: Please see the user guide for help on using Drive Fitness Test.

http://www.fcpa.com/support/hard- drives/software_utilities.html

UDMA Utility (For MPD, MPE, and MPF Series Hard Disk Drives)
UDMA Utility (For MPG Series Hard Disk Drives)
Fujitsu Diagnostic Tool Ver.2.3 (For SCSI Hard Disk Drives)
Fujitsu Diagnostic Tool Ver. 6 (For EIDE Hard Disk Drives)

This diagnostic tool is available for use by customers who feel their Fujitsu drive may not be functioning as well as it should be. It is only designed for use on all Fujitsu EIDE hard drives. There are 2 test modes:

1. Quick Test
About 1 minute, does random seek/read tests.
2. Comprehensive Test
About 6 minutes, also performs surface scan.

Runs only under DOS from a bootdisk.

Fujitsu Erase Utility

Note: This program works only with any FUJITSU IDE hard disk drives

This procedure performs a pseudo- formatting to the drive. It erases all of your previous data and reinitializes it to “00″ pattern. By performing this task, you will be able to erase the whole user area including your Master Boot Record, Partition Table, FAT (File Allocation Table), and all the files and data it refers to. Use this program if you want to be sure your drive is clean.

http://www.samsung.com/Products/HardDiskDrive/utilities/
Samsung Shdiag
Samsumb HDUTIL

Shdiag
This program is used to diagnose the disk when the SAMSUNG hard disk is suspected to have failures.

HUTIL
1. SET MAX ADDRESS : Resizing capacity
2. ERASE HDD : 0-write or low level format
3. SET MAX UDMA MODE : Switching transfer mode
4. AUTOMATIC ACOUSTIC MANAGEMENT : Changing acoustic noise level
5. SELF DIAGNOSTIC : Diagnosing each function and surface defect